To pair the controller to your Spivi^® computer, follow these steps:

1. Plug in the wireless receiver to a USB port on the Spivi^® computer. The green LED will light up.
2. Press and hold the Guide button on the controller until the light on this button starts flashing.
   (The Guide button is the round button with the green “X” near the center of the controller.)
3. Press and hold the wireless receiver button until the green LED on the receiver starts flashing.
4. On the controller, press and hold the Connect button for 2-3 seconds.
   (The Connect button is the small button on the front edge of the controller, between the left bumper button and the charging port.)

Green flashing lights on the controller and the receiver indicate that the device is trying to establish a connection.

Once the lights stop flashing and remain lit around the controller Guide button, the controller is connected.